Yaesu SCU-LAN10, Installation Manual

Page: 32 / 41

32
(2) Connection diagram when connecting directly with a LAN cable and performing remote control
ANT 1 ANT 2
EXT SPKR KEY
ACC TUNER PTT
METER
GND
LINEAR
+13.8V
REM EXT ALC RS-232C
A B
PC
LAN
ACC
ACC
Use the cable ties (accessories) to secure the
two ferrite cores (accessories) to the bases of
the plugs on both ends of the ACC cable.
Commercially available
straight Ethernet cable
(3) Connection diagram for remote control within a local LAN using a router
ANT 1 ANT 2
EXT SPKR KEY
ACC TUNER PTT
METER
GND
LINEAR +13.8V
REM EXT ALC RS-232C
A B
PC
LAN
LAN
ACC
ACC
Use the cable ties (accessories) to secure the
two ferrite cores (accessories) to the bases of
the plugs on both ends of the ACC cable.
Commercially available
straight Ethernet cable
1. Turn the transceiver ON .
Confirm that only the POWER indicator (green) of SCU-LAN10 is in the state of blinking. (It takes about
12 seconds.)