39
Volume control of SCU-LAN10 Network Remote Control Software
1. Adjust the volume on the “
Audio Setup
” screen.
If the “
Audio Setup
” screen is not open, click [
Setup
] and then [
Audio Setup
].
TX AUDIO
TX
Adjust the transmit modulation level.
This adjustment is the same as the MIC GAIN adjustment bar
that appears when you right-click the MIC GAIN/PROC button.
RX AUDIO
MAIN
Adjusts the receive volume of the MAIN band.
This adjustment is the same as the volume control bar
on
the MAIN band operation block.
SUB
Adjusts the receive volume of the SUB band.
This adjustment is the same as the volume control bar
on
the SUB band operation block.
TX MONI
Adjusts the volume of the transmit audio that is monitored by the monitor func-
tion.
This adjustment is the same as the MONI adjustment bar
that
appears when you right-click the MONI button.
AMP
Adjust this when the receive sound of the MAIN and SUB band, or the TX MONI
volume is extremely low or distorted even after the Windows volume adjust-
ment or the above volume adjustment. Normally you do not need to change.
(Factory setting: 8 dB)
LOCAL AUDIO
BEEP
Adjusts the beep volume when operating the remote control software.
If the volume is extremely low or distorted even after adjustment on the “
Audio Setup
” screen, perform the
