12
4.
After confirming, click the [
Next
] button.
5.
If the folder does not exist yet, a confirmation screen will be displayed. To create a new folder, click the
[
Yes
] button.
“
SCU-LAN10 Network remote control software
” and “
SCU-LAN10 setting software
” are installed.
When the installation is complete, “
Congratulations
!” Will be displayed.
6. Click [
Finish
].
Installation of “
SCU-LAN10 Network Remote Control Software
” and “
SCU-LAN10 Setting Software
” is
completed.
If the computer used for the initial settings of SUC-LAN10 and the computer used for remote control are different, install the
required software on both computers using the same procedure.
