20
8. Set it according to the network environment of the place where SCU-LAN10 and the transceiver are ac-
tually installed, which was confirmed in “
Check the LAN for installing the transceiver
The following three connection examples are explained, so please refer to the diagram that applies to your
installation.
(1) For remote control via the Internet
WAN
Modem
LAN
Router
SCU-LAN10
PC
Other network device
Internet
Global fixed IP address or
fixed domain name
IP address of the router
IP Address
Subnet mask
Set according to the following network environment confirmed in “
Check the LAN for installing the trans-
” (Page 8). Check the LAN for installing the transceiver.
WAN side global fixed IP address or fixed domain name
IP address of LAN side of router
Sub-net mask LAN
IP address of another device (PC, network camera, etc.) connected to the same router
