Version 1.0
PartPro150 xP Operation Manual
2
SAFETY AND REGULATION
Please carefully read this notice, all safety precautions, and comply with safety rules when using,
operating, unboxing this product, replacing or removing any components, or maintaining this product.
For more information related to the PartPro150 xP 3D Printer or XYZprinting, visit the official website
(https://pro.xyzprinting.com/) or contact a sales representative.
HANDLING AND OPERATING PRECAUTIONS
Only trained personnel may operate the machine.
Do not try to disassemble, modify the product, otherwise fire, electric shock, or damage may
result.
Do not open the covers or remove the screws or parts other than instructed in the user manual,
otherwise fire, electric shock, or damage may result.
Laser hazard. Do not stare at the laser light as it may cause damage to the eyes.
If you notice any strange noises, smoke or strange odors, shut down the power of the product
immediately and contact service for further instruction.
Do not try to disable or cheat any sensors on the product, otherwise injury or electric shock may
result.
Be sure to read the Material Safety Data Sheet of each material and follow the handling
instructions before using the product.
Wipe off any printing material spilt on any components of the product immediately with a dry
cleaning wiper or dampened with water or ethanol, or the spillage may cause malfunction of the
product or fire.
Make sure to set the power switch to the off position and remove the power cord before
transporting the device.
Only use the grounded power adapter and power cord supplied with the printer to prevent
possible electrical shocking.
WORK PLACE REQUIREMENTS
Avoid exposing the product to direct sunlight or other UV radiation. The printing materials inside
the product may get cured when exposed to external UV source and result in malfunction.
Please do not place any containers with water on (or around) the product; if liquid spills out or
into the machine, it may lead to risk or safety concerns.
Place and use the printer in a well-ventilated area. The process of printing will produce a small
amount of non-toxic odor.
Prohibit use of fire, sparks and heat source.
For a stable printing performance, do not touch or move the product during production.
This machine is not suitable for use in location where children are likely to be present.
RECOMMENDED PROTECTIVE EQUIPMENT
Chemical-resistant gloves.
PRECAUTIONS BEFORE OPENING THE PROTEVTIVE COVERS
Always wear the chemical-resistant gloves to prevent direct contacting with printing materials.
