Version 1.0
PartPro150 xP Operation Manual
31
Resuming the paused task
Before resuming the paused task, make sure the resin bottle is installed correctly and the front and the side
covers are closed securely. Tap the [RESUME] button and wait while the system resuming the printing.
Canceling the printing
You can cancel the printing anytime if necessary.
To cancel the printing:
1.
Tap [CANCEL].
2.
Tap [CONFIRM] on the next page.
3.
Wait while the system is processing
the request and moving the
platform to the top,
4.
Tap [CONFIRM] again when the
system has finished the process.
5.
Clean up the model on the platform and tap [CONFIRM] to close the message.
Switching off auto-refilling
The setting of auto-refilling can be changed during printing.
To adjust the setting, tap
>>
3 times to go to the 4
th
page, and tap the ON/OFF button.
