Version 1.0
PartPro150 xP Operation Manual
16
TOUCH SCREEN
The printer screen shows the following menu when the system is ready. You can use the touch screen to print
from the history, adjust the printer settings, and view the information on the material installed and resin
temperature and system data.
The control panel functions are categorized under the following options in the main menu:
Main Menu
Function
A Resin Temperature
Current temperature of the resin in the tank in degree Celsius. If the resin
temperature is lower than 25
℃
, the heating system will be triggered.
B Network Connectivity
An icon will be shown here when the wireless or Ethernet connection is
enabled. The icon also indicates the status of the connection.
The icon is also the shortcut to connectivity settings. Tap the icon to jump
to the setup page.
When computer connect with printer through the Wifi, the right side top
of the main menu will appear the client IP icon.
C PRINT
Press the icon to view the printing history.
You can also initial printing from the history with this function.
D RESIN
Press the icon to view detailed information on the resin cartridge,
including the material type and resin model.
You can change the setting of resin-refilling here.
Refill
Use this function to enable and disable the auto-refilling function.
E SETTINGS
The menu provides the control of platform movement, brightness and
timeout of the screen, sound volume, display language, connectivity
settings, and show the system information.
Platform
The function is used to move the platform to the top, to the bottom, or to
the location for packing.
General
For setting up display brightness and timeout, audio volume, display
language, wireless and Ethernet configuration.
System
For checking system information, system version, MAC address and the
accumulated print time.
Service Mode
The function is password-protected and limited to servicing personnel
only.
A
B
E
C
D
