Version 1.0
PartPro150 xP Operation Manual
5
7. Move up the platform rack by tapping the following options on the screen:
8.
Complete the hardware installations. Tap [>] on the screen after installing each item.
Refer to p.6 to p.8 for detailed instructions on the installation.
•
Install the platform
.
•
Install the resin tank.
•
Install the wiper.
•
Install the resin bottle.
•
•
9.
Set up Wi-Fi connection or tap [Not now] to skip the
set up.
10.
Tap [v] to complete the initial setting.
Error message 2009 will show
up during the setup, since the
tank is not yet installed.
Simply tap [PROCEED] to close
the message at this stage.
