Xylem SonTek FlowTracker2, User Manual

Page: 58 / 308

SonTek – a Xylem brand
FlowTracker2 User’s Manual (January 2019)
57
File Type Extension Visible
Erase
Template File
Manual Beam
Check Flow Tracker 2
Beam Check File
.ft_beamcheck Yes Yes
Configuration not relevant/not
user exposed
.dat No No
Firmware Flow Tracker 2
Firmware File
.ft_firmware
1) Uploaded from PC.
2) Not visible or accessible in
HH by user.
No
Language Flow Tracker 2
Localization File
.lang
1) Created and uploaded from
PC.
2) Can be deleted in HH by
pressing the Delete button
while the language is
selected.
No
The management of the internal recorder is important requirement to ensure that good
data management practices are followed with regard to the following aspects,
•
safe keeping of measurement files,
•
discarding unwanted measurement files,
•
available recorder space,
•
removing hidden or corrupt files.
The internal recorder should not be used as the main storage device for safe keeping of
measurement files. It is recommended that measurements are downloaded by the end
of each day and a copy of the measurement files are stored on either a computer or
USB flash drive.
Erase Recorder 4.2.2
The Erase function allows the user to erase all Measurement, Template and Manual
Beam Check files that were stored on the internal recorder. See
Table 4.2
for file types
that are impacted by the erase function.
a) Erase Recorder require the user to input
confirmation code “ 123 ”.
b) To ERASE internal recorder,
i). Enter the confirmation code using the keypad,
ii). Press the Right Soft Key to confirm.
c) To CANCEL Erase Recorder,
i).
Press the Left Soft Key.
Figure 4:5 - Erase Recorder