Xylem LOWARA ESHS ATEX, Installation, Operation And Maintenance Manual

Page: 16 / 108

en – Original instructions
16
A hazardous
situation which, if
not avoided, could
lead to minor or
moderately serious
injuries.
ATTENTION:
NOTICE:
Notices are used
when there is a risk
of equipment
damage or
decreased
performance, but
not personal injury.
Special symbols
Some hazard categories have specific symbols, as
shown in the following table.
Electrical hazard Magnetic hazard
Electrical
hazard ATTENTION:
Hot surface hazard
Hot surface hazards are indicated by a specific symbol
that replaces the typical hazard level symbols:
ATTENTION:
Description of user and installer symbols
Specific information for personnel
responsible for the installation of the
product within the system (hydraulic
and/or electric system), and for
maintenance operations.
Specific information for users of the
product.
1.3 Disposal of packaging and product
Observe the local regulations and codes in force
regarding sorted waste disposal.
1.4 Warranty
Refer to the contractual sales documents for
information on the warranty.
1.5 Spare parts
WARNING:
•
Repair and/or maintenance of the
pump must only be carried out by
Xylem or the Authorised
Distributor.
•
Repair and/or maintenance
carried out by unauthorised
companies could lead to
malfunctioning, damage to
property and physical injury, and
render the warranty null and void.
ATTENTION:
Always cite the type and code of the
product when contacting Xylem or the
Authorised Distributor to request
technical information.
1.6 Declarations
1.6.1 EC Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio Maggiore
VI - Italy, hereby declares that the product
Pump unit (see label on first page)
fulfils the relevant provisions of the following
European Directives:
•
Machinery 2006/42/EC and subsequent
amendments (ANNEX II - natural or legal
person authorised to compile the technical
file: Xylem Service Italia S.r.l.)
•
Eco-design 2009/125/EC and subsequent
amendments, Regulation (EU) no. 547/2012
(water pump) if MEI marked
and the following technical standards:
•
EN ISO 12100:2010, EN
809:1998+A1:2009, EN 60204-
1:2006+A1:2009.
Montecchio Maggiore, 11/09/2019
Amedeo Valente
(Director of Engineering
and R&D)
rev.01
1.6.2 EU Declaration of Conformity (n. 15)
1. (ATEX-EMCD) Apparatus/Product model:
(see label on first page)
(RoHS) Unique EEA identification: N. ESH-EX2
2.
Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy
3.
This declaration of conformity is issued under
the sole responsibility of the manufacturer.
4.
Object of the declaration:
pump unit (see label on first page)
5. The object of the declaration described above is
in conformity
with the relevant Union
harmonization legislation: