XY Powersports XY500UTV, Service Manual

Page: 151 / 259

6. ENGINE REMOVAL; INSPECTION & INSTALLATION
6-66
● Install crankshaft C-ring ①
● Install lock washer so that it covers the locating pin;
● Apply thread locker to the bolts before installing, and
tighten them to the specified torque;
Sprocket bolt tightening torque: 15 N·m
● Bend up the lock washer to lock the bolts.
Cylinder Head Cover
● Clean the mating surface of cylinder head and
cylinder head cover;
● Install dowel pin to the cylinder head
● Apply sealant to the mating surface of the cylinder
head cover;
● Install cylinder head cover bolts, tighten diagonally
to the specified torque.
Cylinder head cover bolt tightening torque: 10 N·m
Note: When tightening the cylinder head cover
bolts,the piston must be at top dead center
on the compression stroke.