Xorcom XP0150G User Manual Download

Page: 33 / 126

Customizing Your Phone

To configure the time and date manually via phone user interface:

Press

Menu

Setting

Basic Settings

Time & Date

Manual Setting

Enter the specific date and time.

Press the

Save

soft key to accept the change.

The time that displays on the LCD screen will change accordingly.

To configure the time and date format via phone user interface:

Press

Menu

Setting

Basic Settings

Time & Date Format

Press or , or the

Switch

soft key to select the desired time format (12 Hour

or 24 Hour) from the

Clock

field.

Press or , or the

Switch

soft key to select the desired date format from the

Date Format

field.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

There are 7 available date formats, for example, the date format "WWW DD
MMM","WWW" represents the abbreviation of the week, "DD" represents two-digit of the
date, and "MMM" represents the first three letters of the month.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands