Xorcom XP0150G User Manual Download

Page: 103 / 126

Advanced Phone Features



URL Record

: The phone sends HTTP URL request to trigger a recording. Contact your

system administrator for the predefined URL.

Note

To configure a Record key via phone user interface:

Press

Menu

Features

DSS Keys

Select the desired DSS key.

Press or , or the

Switch

soft key to select

Key Event

from the

Type

field.

Press or , or the

Switch

soft key to select

Record

from the

Key Type

field.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

To configure a URL Record key via phone user interface:

Press

Menu

Features

DSS Keys

Select the desired DSS key.

Press or , or the

Switch

soft key to select

URL Record

from the

Type

field.

Enter the URL (e.g. http://10.1.2.224/phonerecording.cgi)in the

URL Record

filed.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

You can also configure the Record or URL Record keys via web user interface at the
path

DSS Key

The Record/URL Record keys control the recording and are available:



During an active call



When calls are on hold or mute



During a blind or attended transfer



During a conference call



When the phone prompts you to answer an incoming call

The Record/ URL Record keys are not available:



When there are no connected calls on your phone

The record feature is not available on all servers. Contact your system administrator for
more information.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands