Xorcom XP0150G User Manual Download

Page: 36 / 126

User Guide

Xorcom XP0150G IP Phone

Answer call only:

All keys are locked. Incoming calls will be answered

automatically, but cannot be ended by your party.

Note

To set the keypad lock PIN via phone user interface:

Press

Menu

Setting

Basic Settings

Phone Unlock PIN

Enter the

Current PIN

New PIN

and

Confirm PIN

in the corresponding fields.

Press the

Confirm

soft key to accept the setting or the

Back

soft key to cancel.

Note

To activate the keypad lock via phone user interface:

Press

Menu

Setting

Advanced Settings

(password: admin) ->

Phone Setting

Lock

Press or , or the

Switch

soft key to select the desired type from the

Keypad

Lock

field.

Press the

Save

soft key to accept the change.

Long press to lock the keypad immediately when the phone is idle.

The emergency number setting, if desired, must be made before lock activation. For
more information, refer to

Emergency Number

on page

The PIN code can only be 0~9, and not more than 15 characters.
The current PIN is 123.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands