Xorcom XP0150G User Manual Download

Page: 38 / 126

User Guide

Xorcom XP0150G IP Phone

To unlock the keypad lock via phone user interface:

Press any locked key, the LCD screen prompts “Please Enter PIN:”.

Enter the PIN (default PIN: 123).

Press the

Confirm

soft key to unlock the keypad.

The icon disappears from the LCD screen.

You can long press to lock the keypad again.

To deactivate the keypad lock via phone user interface:

Press

Menu

Setting

Advanced Settings

(password: admin) ->

Phone Setting

Lock

Press or , or the

Switch

soft key to select

Disabled

from the

Keypad Lock

field.

Press the

Save

soft key to accept the change.

You can also activate or deactivate the keypad lock via web user interface at the
path

Phone

Features->Phone Lock

Note

The default PIN for unlock is 123, you can also unlock the keypad by administrator
password. When you enter the administrator password to unlock the keypad, the phone
will then turn to the

Change PIN

interface.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands