Xorcom XP0150G User Manual Download

Page: 85 / 126

Basic Call Features

3) (Optional.) Enter the busy forward on code or off code respectively in

the

On Code

Off Code

field.

c.) If you select

No Answer Forward

1) Press or , or the

Switch

soft key to select

Enable

from the

Answer

field.

2) Enter the destination number you want to forward all unanswered

incoming calls to in the

Forward to

field.

3) Press or , or the

Switch

soft key to select the ring time to wait

before forwarding in the

After Ring Times

field (The default ring time is

60 seconds).

4) (Optional.) Enter the no answer forward on code or off code

respectively in the

On Code

Off Code

field.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

The icon on the idle screen indicates the call forward is enabled.

You can also configure forward feature via web user interface at the path

Phone

Features

Forward

Note

You can also enter the SIP URL or IP address in the

Forward to

field. For more information

on using the SIP URL or IP address, refer to

Placing Calls

on page

Call forward feature is local to the phone, and may be overridden by the server settings.
Call forward on code or off code may be different between servers. For more
information, contact your system administrator.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands