Xorcom XP0150G User Manual Download

Page: 52 / 126

User Guide

Xorcom XP0150G IP Phone

To configure the BroadSoft call log via phone user interface:

Press

Menu

Features

BroadSoft Settings Menu

CallLog Settings

Press or , or the

Switch

soft key to select the desired call log item from the

CallLog Item

field.

Enter the parameters: display name, server address, port, username and password
in the corresponding fields.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

To configure the BroadSoft call log via web user interface:

Click on

Contacts

Call Log

Select the desired call log item from the pull-down list of

Calllog Item

Enter the parameters: display name, server address, port, username and password
in the corresponding fields.

Click

Confirm

to accept the change.

To access the BroadSoft call log via phone user interface:

Press

Menu

History

Network Call Log

Select the desired call log menu, and then press the

Enter

soft key.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands