Xorcom XP0150G User Manual Download

Page: 66 / 126

User Guide

Xorcom XP0150G IP Phone

To disable an account via phone user interface:

Press

Menu

Setting

Advanced Settings

(password: admin) ->

Accounts

Select the desired account and then press the

Enter

soft key.

Select

Disable

from the

Activation

field.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

You can also register or disable an account via web user interface at the path

Account

Basic

Multiple Line Keys per Account

You can configure multiple line keys associated with an account. This enhances call
visualization and simplifies call handling.

If this is the case, the LCD screen could resemble the following figure:

Incoming calls to this line will be distributed evenly among the available line keys.
Similarly, outgoing calls will be distributed.

Your phone can be configured to have a combination of lines with a single line key and
lines with multiple line keys.

Dial Plan

Dial plan is a string of characters that governs the way your Xorcom XP0150G IP phone
processes the inputs received from your phone keypad. The Xorcom XP0150G IP phone
supports the following dial plan features:









Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands