Xorcom XP0150G User Manual Download

Page: 105 / 126

Advanced Phone Features

To configure a hot desking key via phone user interface:

Press

Menu

Features

DSS Keys

Select the desired DSS key.

Press or , or the

Switch

soft key to select

Key Event

from the

Type

field.

Press or , or the

Switch

soft key to select

Hot Desking

from the

Key Type

field.

Leave the

Value

field blank.

Press the

Save

soft key to accept the change or the

Back

soft key to cancel.

You can also configure a hot desking key via web user interface at the path

DSS Key

To use hot desking:

Press the hot desking key when the phone is idle.

The phone prompts the following warning:

Press the

soft key, all currently configured accounts will be unregistered

immediately and their configuration data will be removed from the phone.

Summary of Contents for XP0150G































































































































Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands

Xorcom XP0150G, User Manual

Search results

Summary of Contents for XP0150G

Reviews:

Related manuals for XP0150G

Brands by name

Popular brands