Xerox WorkCentre Pro 580, User Manual

Page: 36 / 194

1.30 Getting Started
• If the LED is on, Power Save mode activates and the
machine will go to a reduced power state. But it takes
slightly longer to receive incoming faxes due to warm up of
the machine.
• If the LED is off, Power Save mode deactivates and the
machine keeps ready to operate with the minimum warm-
up time. This uses more energy to keep your machine warm
and ready to print.
To specify how long the machine waits before going to the
Power Save mode, press and hold down the
Power Save
button, press or to select ON and press the Start/
Enter button. Select the desired time length among 5MIN ,
10MIN and 15MIN using or . Press the Start/Enter
button. Selecting OFF turns the Power Save mode off.
N
OTES
:
• Although you turned Power Save mode off by pressing
the Power Save button, it activates if you have set a time
length.
• If your printer is used constantly, press and hold the Power
Save button and set the time to OFF . This keeps the printer
ready to print with the minimum warm-up time.