Xerox WorkCentre Pro 412, Service Manual

Page: 90 / 192

Maintenance & Troubleshooting
WorkCentre Pro 412
Launch Issue
7-8
August 2001
7-2-5 Firmware Upgrade
1. Upgrade Local Machine.
• By using ControlCentre Application (Parallel & USB).
- Activate ControlCentre 5.0.
- Select Firmware Upgrade Window.
- Click Browse Icon to search the Upgrade Firmware.
- Click Upgrade Icon.
- The message “Upgrading Firmware” will be displayed.
- Wait until the machine is initialised, this will happen automatically after completion of the upgrade.
- Click the Refresh icon when the machine has been initialized.
- The machine is now updated with New Firmware.
2. Upgrade the Remote Fax.
- Performed on the Local Machine in the Service Center.
- Go to the Tech Mode -Search for the Flash Upgrade in Maintenance Item, select REMOTE.
- Enter Remote Fax Number to be upgraded.
- Multiple remote FAXs can be upgraded sequentially if you enter the multiple FAX numbers.
- Select All Remote Fax Number if required.
- Confirm Input. - Machine will start dialing and send its own image codes to remote fax machine(s).
- It will take 10 to 15 minutes to send the image to each remote FAX machine.
- The Remote Fax machine will automatically program the received image on its flash memory.
- If ECM mode is off, or Received Memory is not empty, or machine is being used, the remote upgrade will
not be performed.