Xerox WorkCentre Pro 412, Service Manual

Page: 147 / 192

Exploded View & Parts List
WorkCentre Pro 412
Launch Issue 8-29
August 2001
8-12-1 Main Frame Ass’y Parts List
No DESCRIPTION SEC. CODE Q’TY REMARK
1 ELA HOU-FRAME MAIN ASS’Y 600N01743 1
1-1 PMO-HOUSING TERMINAL 1
1-2 IPR-TERMINAL BLADE 2
1-3 IPR-TERMINAL SUPPLY 2
1-4 IPR-TERMINAL TR 1
1-5 IPR-TERMINAL GND 1
1-6 IPR-TERMINAL DEVE KEY 2 NOT SPARED
1-7 CBF-HARNESS;MAIN-DEV_KEY 1 NOT SPARED
1-8 CBF-HARNESS; HVPS OUTPUT-FRAME 5 NOT SPARED
1-9 CBF-HARNESS:MAIN-THV 1 NOT SPARED
1-10 CBF-HARNESS;MAIN-MHV 1 NOT SPARED
1-11 PMO-FRAME MAIN 1
1-12 PMO-LENS TONER SENSOR 2
1-13 IPR-GND EXIT 1
1-14 IPR-GND OPC 1
1-15 IPR-GND OPC BASE 1
1-16 IPR-GND FUSER 1
1-17 IPR-GUARD C/O S/W 1
1-18 IPR-GND TERMINAL 1
1-19 CBF HARNESS-;FUSER(2PIN,550mm) 1 NOT SPARED
1-20 CBF-HARNESS;SWITCH-MICRO 110N01041 2
1-21 CBF-HARNESS MOTOR 1
1-22 PBA SUB-EXIT SENSOR 130N01205 1
1-23 PBA SUB-TONER_RX 130N01208 1
1-24 GEAR-EXIT/U,ID 3
1-25 GEAR-EXIT,IDLE(Z17) 2
1-26 CBF-HARNESS THERMISTOR_JOINT 011N00463 1
1-27 PMO-HOUSING TERMINAL 116N00227 1
1-28 IPR-TERMINAL FU 2
1-29 PMO-CAP CONNECTOR L 113N00364 1
1-30 PMO-CAP CONNECTOR U 113N00365 1
1-31 CBF-HARNESS; RESISTOR ASS’Y(100Mohrn) 1
1-32 SPRING-CLUTCH 2
1-33 RING-CS 5
S NUT-HEXAGON 2
S SCREW-TAPPING,M2*18 1 NOT SPARED
S SCREW-ASS’Y MACH 2
S SCREW-TAPTITE,M3*8 BLACK,BINDER 17
2 PMO-CAM JAM REMOVE 011N00465 1
3 PMO-LOCKER DEVE 011N00465 1
4 PMO-LEVER JAM REMOVE 011N00465 1