Error Messages and Codes
3-9
1,000.4x Error - 525-Sheet Feeder Faults
1,001.46:
The upper 525-sheet feeder had an overcurrent condition. The lift motor or
clutch may be shorted.
1,002.47:
The lower 525-sheet feeder had an overcurrent condition. The lift motor or
clutch may be shorted.
1,0XX.6x Errors
- 525-Sheet Feeder program faults
a.
Reseat the system onto the 525-sheet feeder.
b.
Ensure ground integrity for the system (see "Ensuring Ground Integrity" on
page 4-73).
c.
Reset NVRAM.
d.
Replace the 525-sheet feeder.
Troubleshooting Procedure
Step
Questions or Actions
Yes
No
1
1.
Unplug all connectors to the optional 525-
sheet feeder.
2.
Remove the feeder and inspect the
connector.
3.
Replace any damaged connectors either on
the 525-sheet feeder or engine.
4.
Reseat and reconnect the 525-sheet feeder
to the system.
5.
Did this correct the problem?
Complete.
Go to Step 2.
2
1.
Inspect the pick rollers in the 525-sheet
feeder tray(s).
2.
Are the pick rollers damaged, dirty, or not
moving freely?
Replace the
pick assembly.
Go to Step 3.
3
1.
Run the Tray [3]/[4] Pick Clutch test.
2.
Does the pick clutch operate correctly?
Go to Step 4.
Replace the
525-sheet
feeder.
4
1.
Run the Tray [3]/[4] Lift Motor test.
2.
Does the lift motor operate correctly?
Go to Step 5.
Replace the
525-sheet
feeder.
5
1.
Check the wiring from the 525-sheet feeder
to the Electronics Module (J390).
2.
Is the wiring defective?
Replace the
wiring and go to
Step 3.
Replace the
525-sheet
feeder.
Summary of Contents for WORKCENTRE C2424
