Paper and Media
54
WorkCentre 7800 Series Multifunction Printer
User Guide
5.
Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note:
To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
6.
Load the paper in the tray. Do one of the following:
−
For long-edge feed, insert letterhead and pre-printed paper face down with the top edge
toward the front. Load hole punched paper with the holes to the left.
−
Load labels face up with the top edge toward the front of the tray.
−
For short-edge feed, insert letterhead and pre-printed paper face down with the top edge to
the left. Load hole punched paper with the holes toward the back.
−
Load labels face up with the top edge to the right.
Note:
Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
