Scanning
136
WorkCentre 7800 Series Multifunction Printer
User Guide
Building a Scan Job
Use this feature to combine an assorted group of originals for assembly into a single scan job.
To build a scan job:
1.
Press the
Services Home
button, then touch
Workflow Scanning
.
2.
Touch the
Job Assembly
tab, then touch
Build Job
>
On
.
3.
Touch
Options
.
a.
Select or clear the
Display this window between segments
check box.
b.
Select or clear the
Turn Build Job Off after Job is Submitted
check box.
4.
Program and scan the first segment:
a.
Load the originals for the first segment.
b.
Press the green
Start
button on the control panel.
Note:
If a password is required, contact the system administrator.
5.
Program and scan additional segments:
a.
Load the originals for the next segment.
b.
When the Build Job screen appears, touch
Program Next Segment
.
c.
Press the green
Start
button to scan the originals for that segment.
6.
Repeat the previous step for each remaining segment.
Note:
At any time, you can touch
Delete All Segments
to modify the job.
7.
When all of the segments have been programmed and scanned, touch
Submit the Job
. The Job
Progress screen appears, and the individual segments are scanned as a single job.
Note:
If necessary, touch
Delete
>
Delete Job
to cancel the job.
