Xerox WorkCentre 6605 Service Manual Download Page 90

Page: 90 / 662

General Information

Phaser 6600 and WorkCentre 6605

Xerox Internal Use Only

Service Manual

1-78

Logging

Job Logging

The machine can retain up to 20 job logs.

Job log is printed instantly by user's request or automatically when the number of the retained job logs
has reached 20.

Job log includes the following information.
•

Job finish date and time

•

Job type (Print/File/FaxSend/FaxReceived/Copy/Scan) — MFP only

•

Input interface (USB, LPD, Port9100)

•

Document name (File name)

•

Output color

•

User name/Host name

•

Number of printed sheets (Color, B&W)

•

Number of printed impressions (Color, B&W)

•

Paper size

•

Result (Successful, Error, etc.)

Error Logging

The machine can retain the following errors.

Fatal error: 42 errors at the maximum (10 errors at the minimum)

Jam error: 42 errors

The user can print the error log by the panel operation.

Jam error log includes the following information.
•

Date and time when jam has occurred

•

Jam name Fatal error log includes the following information.

•

Date and time when error has occurred

•

Error code

Billing Counter

The PV counter counts the number of sheets printed properly (Similar to Odometer).

Counter

Description

Color PV (7 digits)(KCMY)

Count the number of paper printed in color.

B&W PV (7 digits)(K only)

Count the number of paper printed in B&W.

Total PV (7 digits)

Count the total number of paper printed in color and B&W.

Summary of Contents for WorkCentre 6605






















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WorkCentre 6605

Reviews:

Related manuals for WorkCentre 6605

Brands by name

Popular brands

Xerox WorkCentre 6605, Service Manual

Search results

Summary of Contents for WorkCentre 6605

Reviews:

Related manuals for WorkCentre 6605

Brands by name

Popular brands