Xerox WorkCentre 6605, Service Manual

Page: 221 / 662

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-125
017 983 EEPROM R/W
Error
At system boot, EEPROM
Read/Write check error
(sumcheck error) Initialize NVM
Initializing... -
017 986 Create empty file (0Byte) Fax Controller Error 017-986
Empty File created
Job canceled. Please restart device
and try again.
* Caution screen with [Close]
button
Replace the
IP Board.
017 987 Cannot read file because it
is bigger than read
destination buffer. Fax Controller Error 017-987
File exceeds destination buffer size
Job canceled. Please try again
later.
* Caution screen with [Close]
button
Replace the
IP Board.
017 988 Timeout at start of
ScanToApplicaion Scan Job Timeout Error 017-988
Job canceled.
Restart Scan Job.
* Caution screen with [Close]
button
Replace the
IP Board.
017 989 Stop writing because size
of file to be written is
bigger than read
destination buffer (even if
file writing is continued, it
is impossible to read the
file). Fax Controller Error 017-989
File to be written exceeds
destination buffer size
Job canceled. Please try again
later.
* Caution screen with [Close]
button
Replace the
IP Board.
017 990 IIT Auto
Registration
Adjustment Fail
Fail to adjust IIT
registration automatically
at start-up.
Set to default value and
continue processing. no error
Record to ErrorLog. -
017 991 IIT Level
Adjustment Fail
At the start of IIT read job,
fail to adjust IIT level.
Set to default value and
continue processing. no error
Record to ErrorLog. -
WorkCentre 6605 Error Code List
Chain Link Error Error Details Control Panel Messages
FIP
location