Xerox WorkCentre 6605, Service Manual

Page: 117 / 662

Error Troubleshooting
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
2-21
ASIC Test
ASIC Test reads the device ID of the REMORA-EX via ZoranQuatro4530 and performs the Zoran
Quatro4530 and REMORA-EX tests.
Engine Test
IOT Test provides the communication test between the IOT. In this communication test, the IOT
status register is read for checking whether the commands are exchanged normally.
Hard Drive Test
Use the Device Diagnostic Command to perform the Hard Disk Test.
USB Host Test
USB Host Test checks the communication between a USB Host port and the USB devices connected to
the USB Host port.
* This test menu is for obtaining the USB authentication. To use this test, you will need the devices
approved by the certification authority.
Normal Error
CHECK OK ASIC CHECK NG
Normal Error
CHECK OK IOT ERROR
Normal Error
CHECK OK Hard Disk ERROR