manualshive.com logo in svg

Xerox WorkCentre 5222, System Administration Manual

Share
Download
Xerox WorkCentre 5222 System Administration Manual Download Page 415

Fault Codes 

415

027-525

During data transfer via SMB using the Scan to PC service, a file could not be 
deleted from the SMB server due to one of the following reasons:
• The file does not exist.
• The file is opened.
• The specified file name is being used as a directory.
Check whether or not the file is not being used by another user at the specified 
save location.

027-526

During data transfer via SMB using the Scan to PC service, a lock folder could 
not be deleted from the SMB server due to one of the following reasons:
• The file does not exist.
• The directory is not empty.
• The specified directory name does not exist.
If any lock directory (.LCK) exists in the forwarding destination, manually delete 
it, and then try again.

027-527

During data transfer via SMB using the Scan to PC service, a folder could not be 
deleted from the SMB server due to one of the following reasons:
• The file does not exist.
• The directory is not empty.
• The specified directory name does not exist.
Check whether or not the file is not being used by another user at the specified 
save location.

027-528

During data transfer via SMB using the Scan to PC service, no space is 
available at the save location on the SMB server.
Check if the save location has free space.

027-529

During data transfer via SMB using the Scan to PC service, an unexpected error 
has occurred on the SMB server, or an unexpected internal error has occurred 
on the machine.
Log in to the server from another computer using the same user name to see if a 
file can be written into the same save location on the server. If the problem 
persists, it may be an internal error. Contact the Xerox Welcome Center.

027-530

During data transfer via SMB using the Scan to PC service, a file could not be 
saved because [Do Not Save] had been selected for [File Name Conflict].
Select any option other than [Do Not Save] for [File Name Conflict].

027-531

During data transfer via SMB using the Scan to PC service, an error occurred 
because the filing policy was invalid.
When selecting [Rename New File] in [File Name Conflict], make sure that the 
file format is not Multi-Page.

027-532

During data transfer via SMB using the Scan to PC service, an error occurred 
when accessing to the NEXTNAME.DAT file.
If [Rename New File] has been selected for [File Name Conflict], check if the 
NEXTNAME.DAT file is correct.

027-533

During data transfer via SMB using the Scan to PC service, an internal error 
occurred.
Try executing the same operation. If the problem persists, contact the Xerox 
Welcome Center.

027-543

The SMB server (NetBIOS) name is invalid.
Check if the name of the SMB server is correct.

Code

Description and Remedy

Summary of Contents for WorkCentre 5222







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands