manualshive.com logo in svg

Xerox WorkCentre 5222, System Administration Manual

Share
Download
Xerox WorkCentre 5222 System Administration Manual Download Page 104

6 Setups 

104

Unregistered Forms

Specifies whether to abort a job which is specified to use form overlay when a form is 
not found (not registered) in the machine.

Print User ID

Specifies whether to print the user ID and the position to print the ID, when printing 
using a printer driver to distinguish between users. The user ID is a maximum of 64 
characters set by the printer driver. For more information, refer to the printer driver 
online help.

Banner Sheet

Specifies whether to add sorting sheets (banner sheets). This is effective for 
sorting/classifying to differentiate printed sheets from the rest. You can add banner 
sheets before and/or at the end of the print job.

NOTE: 

Even if the Finisher is used, banner sheets will not be stapled. Banner sheets 

from print jobs from a Macintosh do not display the document name. Printing banner 
sheets also increments the billing meter.

Banner Sheet Tray

Specifies the tray for banner sheets.

PostScript Paper Supply

Specifies whether to use the DMS (Deferred Media Selection) feature of PostScript or 
to select a paper tray.

PostScript Font Absence

Specifies whether to substitute fonts automatically and continue the print job when a 
required font is not found. The substitute font is Courier.

NOTE: 

This feature is available only when PostScript is loaded.

PostScript Font Substitution

Specifies whether to use ATCx during font substitution.

NOTE: 

This feature is available only when PostScript is loaded.

XPS Print Ticket Processing

Specifies how the machine processes the print tickets written in XPS documents. 
Selecting [Off] does not process print tickets. Selecting [Standard Mode] uses the 
standard mode, and [Compatible Mode] uses the Microsoft-compliant mode to process 
print tickets.

NOTE: 

XPS stands for XML Paper Specification.

LPD Print Queue

Specifies the LPD print sequence. If [Job Submission Order] is selected, [Receiving 
Buffer - LPD] under [Allocate Memory] is automatically set to [Spool to Hard Disk].

Summary of Contents for WorkCentre 5222







































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands