Xerox WorkCentre 5222, System Administration Manual

Page: 140 / 454

6 Setups
140
System Administrator Settings
This section describes the features that allow you to change the System Administrator’s
login ID and passcode. The machine enters the System Administration mode only
when a correct System Administrator login ID is entered. Before shipment, the default
System Administrator login ID is set to “11111”. For more information, refer to the
following:
System Administrator’s Login ID – page 140
System Administrator’s Passcode – page 140
1.
Select [Authentication/Security
Settings], and then select
[System Administrator Settings]
in the [Group] menu.
System Administrator’s Login ID
This feature allows you to change the default System Administrator’s Login ID.
Program a new ID between 1 and 32 alphanumeric characters.
1.
Select [System Administrator
Login ID] in the [Features]
menu.
2.
Select [On].
3.
Touch [Keyboard], and then use
the screen keyboard or the numeric keypad on the control panel to enter a new
System Administrator ID.
4.
Select [Close] to close the keyboard screen.
5.
Repeat steps 3 and 4, to enter the same System Administrator ID.
6.
Select [Save].
System Administrator’s Passcode
This feature allows you to change the default System Administrator passcode. Program
a new passcode between 4 and 12 alphanumeric characters including spaces.
1.
Select [System Administrator’s
Passcode] in the [Features]
menu.
2.
Touch [Keyboard], and then use
the screen keyboard or the
numeric keypad on the control
panel to enter a new System Administrator passcode.
3.
Select [Close] to close the keyboard screen.
4.
Repeat steps 2 and 3, to enter the same System Administrator passcode.
5.
Select [Save].
Authentication
This section describes the settings related to user authentication.