Xerox VersaLink B615, User Manual

Page: 147 / 220

• To reset the color scan settings to factory-default values, touch Reset to Factory Defaults. Follow
the onscreen instructions.
4. When finished, touch Close.
5. To exit the menu, touch X.
6. When finished, to return to the Home screen, press the Home button.
Refreshing the Toner
Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with
high or low toner coverage, Toner Refresh can optimize print quality.
Note
Do not use this procedure repeatedly. Running the procedure repeatedly uses the toner supply more
quickly.
To refresh the toner:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Toner Refresh.
3. To perform a Toner Refresh process, touch Start.
4. At the successfully completed prompt, touch Close.
5. To exit the menu, touch X.
6. To return to the Home screen, press the Home button.
Transfer Voltage Adjustment
Use Transfer Voltage Adjustment to specify the bias transfer roller voltage for printing on the selected
paper type. If the printed image is too light, increase the voltage for the paper you are using. If the
printed image is mottled or blotchy-looking, decrease the voltage for the paper you are using.
To adjust the transfer voltage:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Transfer Voltage Adjustment.
3. To select the paper type for the adjustment, touch Paper Type, then touch the required paper type.
4. To adjust the transfer voltage, for Voltage Level, touch the Plus icon (+) or the Minus icon (-).
5. Touch Adjust.
6. To exit the menu, touch X.
7. To return to the Home screen, press the Home button.
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print
is smeared or can be rubbed off the paper, increase the temperature for the paper you are using. If the
toner is blistered or mottled, decrease the temperature for the paper you are using.
To adjust the fuser:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Fuser Temperature Adjustment.
3. To select the paper type, touch Paper Type, then touch the name of the paper type in the list.
4. To increase or decrease the fusing temperature, touch the arrow buttons, then touch Adjust.
7-13 Xerox ® VersaLink ® B605/B615 Multifunction Printer
User Guide
Maintenance