Regulatory Information
Xerox
®
VersaLink
®
B405 Multifunction Printer 227
User Guide
This printer, if used properly in accordance with the instructions, is not dangerous for the consumer or for
the environment.
A signed copy of the Declaration of Conformity for this printer can be obtained from Xerox.
WARNINGS:
•
Changes or modifications to this equipment not specifically approved by the Xerox
Corporation may void the user's authority to operate this equipment.
•
External radiation from Industrial, Scientific, and Medical (ISM) equipment can interfere
with the operation of this Xerox device. If external radiation from ISM equipment
interferes with this device, contact your Xerox representative for assistance.
•
This is a class A product. In a domestic environment, this product can cause radio
frequency interference, in which case the user can be required to take adequate measures.
•
To ensure compliance with European Union regulations, use shielded interface cables.
European Union Lot 4 Imaging Equipment Agreement Environmental
Information
Environmental Information Providing Environmental Solutions and Reducing Cost
The following information has been developed to assist users and has been issued in relation to the
European Union (EU) Energy Related Products Directive, specifically the Lot 4 study on Imaging
Equipment. This requires manufacturers to improve environmental performance of in scope products
and supports the EU action plan on energy efficiency.
In scope products are Household and Office equipment that meet the following criteria.
•
Standard monochrome format products with a maximum speed less than 66 A4 images per minute
•
Standard color format products with a maximum speed less than 51 A4 images per minute
Environmental Benefits of Duplex Printing
Most Xerox products have duplex printing, also known as 2-sided printing, capability. This enables you to
print on both sides of the paper automatically, and therefore helps to reduce the use of valuable
resources by reducing your paper consumption. The Lot 4 Imaging Equipment agreement requires that
on models greater than or equal to 40 ppm color or greater than or equal to 45 ppm monochrome the
duplex function has been auto enabled, during the setup and driver installation. Some Xerox models
below these speed bands may also be enabled with 2-sided printing settings defaulted on at the time of
install. Continuing to use the duplex function will reduce the environmental impact of your work.
However, should you require simplex/1-sided printing, you may change the print settings in the
print driver.
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper
(60 g/m²), which contains less raw material and thus save resources per print, may be used in certain
applications. We encourage you to check if this is suitable for your printing needs.
