background image

24-pin Dot Matrix Printer

All rights reserved. No part of this publication may be reproduced, stored in a retrieval 
system, or transmitted in any form or by any means, electronic, mechanical, photocopying, 
recording, or otherwise, without the prior written permission of SEIKO EPSON 
CORPORATION. The information contained herein is designed only for use with this EPSON 
printer. EPSON is not responsible for any use of this information as applied to other printers.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of 
this product or third parties for damages, losses, costs, or expenses incurred by the purchaser 
or third parties as a result of: accident, misuse, or abuse of this product or unauthorized 
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly 
comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from 
the use of any options or any consumable products other than those designated as Original 
EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.

EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P2 is a trademark 
of SEIKO EPSON CORPORATION.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

IBM is a registered trademark of International Business Machines Corporation.

General Notice:

 Other product names used herein are for identification purposes only and 

may be trademarks of their respective owners. EPSON disclaims any and all rights in those 
marks.

Copyright © 2002 by SEIKO EPSON CORPORATION, Nagano, Japan.

®

Reference Guide

Summary of Contents for LQ 630S

































































































































































Reviews: