Epson LQ 630S Page 19 Reference Manual Download

Page: 19 / 160

Paper Handling

4. Slide the edge guide until it rests against the guide mark.

5. While aligning the left side of a sheet of paper with the edge

guide, insert it into the printer until it meets resistance. Be sure
to load paper printable side up and the top of the paper first.

After a few seconds, the printer automatically advances the paper
to the loading position. The printer is ready to start printing.

Note:

❏

If the paper feed roller rotates but the printer does not load the paper,
completely remove the paper and then insert it all the way into the
printer again.

❏

If the paper feeds before you can adjust its position properly, increase
the

Manual feed wait time

in the default-setting mode. See

“Changing default settings” on page 47 for more information.

guide mark

Summary of Contents for LQ 630S

































































































































































Search results

Summary of Contents for LQ 630S

Reviews:

Related manuals for LQ 630S

Brands by name

Popular brands

Epson LQ 630S, Reference Manual

Search results

Summary of Contents for LQ 630S

Reviews:

Related manuals for LQ 630S

Brands by name

Popular brands