Epson LQ 630S, Reference Manual

Page: 21 / 160

Paper Handling
15
1
1
1
1
1
1
1
1
1
1
1
1
You can load single-sheet multipart forms from the paper guide.
For instructions, see “Loading Single Sheets” on page 12. You can
load continuous multipart forms in the same way as you load
ordinary continuous paper. For instructions, see “Loading
Continuous Paper” on page 5.
c
Caution:
When printing on multipart forms, make sure that your software
settings keep the printing entirely within the printable area of the
forms. Printing on the edge of a multipart form can damage the
print head. For information about the printable area, see
“Printable area” on page 142.
Labels
You can use two types of labels: single-sheet and continuous
forms. Do not use labels on shiny single-sheet backing, because
the backing sheet tends to slip and may not feed properly.
Follow these steps to load labels:
c
Caution:
Use labels only under normal operating conditions because labels
are especially sensitive to temperature and humidity.
1. Make sure of the following:
❏
Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see “Printable area” on page 142.
c
Caution:
Printing on the edge of a label can damage the print head.
❏
The auto tear-off function is turned off in the
default-setting mode.
2. Load labels as described in “Loading Single Sheets” on page
12 or “Loading Continuous Paper” on page 5.