Safety
Xerox
®
VersaLink
®
B405 Multifunction Printer
13
User Guide
Electrical Safety
This section includes:
•
General Guidelines ........................................................................................................................................................... 13
•
Power Cord ......................................................................................................................................................................... 13
•
Emergency Turn Off ........................................................................................................................................................ 14
•
Telephone Line Cord ....................................................................................................................................................... 14
General Guidelines
WARNINGS:
•
Do not push objects into slots or openings on the printer. Touching a voltage point or
shorting out a part could result in fire or electric shock.
•
Do not remove the covers or guards that are fastened with screws unless you are installing
optional equipment and are instructed to do so. Power off the printer when performing
these installations. Disconnect the power cord when removing covers and guards for
installing optional equipment. Except for user-installable options, there are no parts that
you can maintain or service behind these covers.
The following are hazards to your safety:
•
The power cord is damaged or frayed.
•
Liquid is spilled into the printer.
•
The printer is exposed to water.
•
The printer emits smoke, or the surface is unusually hot.
•
The printer emits unusual noise or odors.
•
The printer causes a circuit breaker, fuse, or other safety device to activate.
If any of these conditions occur, do the following:
1.
Power off the printer immediately.
2.
Disconnect the power cord from the electrical outlet.
3.
Call an authorized service representative.
