ADJ 5.2 Scan Registration
(continued)
NOTE: The Display example below is an
enlargement of the Data bit numbers as seen
in the display. Above it are the corresponding
bit numbers found in Table 1.
BITS
7
6
5
4
3
2
1
0
DATA
1
0
0
0
1
0
0
0
f.
Press the Select button to move the
cursor beneath the bit number (3, 2,
1, or 0) you wish to change.
g.
Press the number “1“ or “0“ on the
keypad.
h.
Move the cursor to the next bit
number or press Enter to effect the
change.
j.
Press Stop. The terminal will reboot
and retain the changes.
6. Verify that new setting achieves the
correct position by performing the Check
again. Reposition as needed.
12/88
Telecopier 7017 / 7017SF
4-55
ADJ 5.2
www.printcopy.info
www.printcopy.info
