REP 4.21 Cutter Clutch
(continued)
11. Remove printer output drive roller (REP
4.10).
12. Remove pressure roller assembly (REP
4.11).
13. Remove thermal head assembly (REP
4.12).
14. Remove cutter crank arm (REP 4.13).
15. Remove cutter belt.
16. Remove planetary assembly (REP 4.19).
17. Remove cutter crank pulley (REP 4.20).
18. Remove cutter clutch.
a.
Manually actuate cutter solenoid.
b.
Remove the cutter clutch.
Replacement
Reinstall in reverse order.
REP 4.22 Cutter Solenoid
Assembly
Parts List on PL 4.4
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove coupler cover (REP 1.3).
4. Remove LH cover (REP 1.4).
5. Remove output tray assembly (REP 1.5).
6. Remove rear cover (REP 1.6).
7. Remove cutter solenoid assembly.
a.
Remove cutter solenoid assembly
harness from cable clamp.
b.
Remove J118 at A0 CNC PWB.
c.
Remove the two screws securing
cutter solenoid assembly to the LH
frame.
d.
Remove cutter solenoid assembly.
Replacement
1. Reposition cutter solenoid bracket.
2. Reposition cutter solenoid plunger pin to
engage in cutter solenoid lever. (Figure
1)
3. Secure cutter solenoid assembly to the LH
frame with the two screws.
4. Reinstall in reverse order.
12/88
Telecopier 7017 / 7017SF
4-39
REP 4.21, 4.22
www.printcopy.info
www.printcopy.info
