REP 4.1 Low Paper Sensor and
RX: Wide Paper Sensor
Parts List on PL 4.1
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove input tray / printer cover
assembly (REP 1.9).
4. Remove sensor. (Figure 1)
a.
Disconnect jack from sensor:
J408 low paper sensor
J409 RX: wide paper sensor
b.
Remove screw securing sensor.
c.
Remove sensor.
Replacement
1. Reposition sensor on locating point.
2. Reinstall screw securing sensor.
3. Connect jack:
J408 low paper sensor
J409 RX: wide paper sensor
4. Ensure wire harnesses are properly
routed through guide fingers. (Figure 2)
5. Reinstall remaining components in
reverse order.
12/88
Telecopier 7017 / 7017SF
4-23
REP 4.1
www.printcopy.info
www.printcopy.info
