REP 4.13 Cutter Crank Arm
Parts List on PL 4.2
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove coupler cover (REP 1.3).
4. Remove LH cover (REP 1.4).
5. Remove the cutter crank arm. (Figure 1)
a.
Remove the two E-rings securing the
cutter crank arm.
b.
RX: Remove spring.
c.
Remove the cutter crank arm.
Replacement
1. Reinstall the cutter crank arm.
a.
Rotate the cutter thumbwheel until
the stud on the cutter crank pulley
aligns with the cutter crank arm.
b.
Reinstall the cutter crank arm and
secure with the E-rings.
2. Reinstall remaining components in
reverse order.
REP 4.14 Cutter Cam
Parts List on PL 4.2
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove RH cover (REP 1.2).
4. Remove coupler cover (REP 1.3).
5. Remove LH cover (REP 1.4).
6. Remove upper printer assembly (REP 4.7).
7. Remove cutter (REP 4.9).
8. Remove cutter crank arm (REP 4.13).
9. Remove cutter cam.
a.
Depress cutter solenoid plunger.
b.
Remove cutter cam.
Replacement
Reinstall in reverse order.
12/88
Telecopier 7017 / 7017SF
4-33
REP 4.13, 4.14
www.printcopy.info
www.printcopy.info