REP 3.12 Scan Motor
Parts List on PL 3.3
Removal
1. Remove power cord.
2. Remove document catch tray assembly
(REP 1.1).
3. Remove RH cover (REP 1.2).
4. Remove coupler cover (REP 1.3).
5. Remove LH cover (REP 1.4).
6. If installed, remove A8 store and forward
PWB.
7. Remove A2 main PWB (REP 5.5).
8. Remove power supply assembly (REP 5.6).
9. Remove CNC PWB assembly (REP 5.10).
10.Remove scan motor. (Figure 1)
a.
Remove scan input drive belt from
scan motor.
b.
Remove the two screws from the scan
motor.
c.
Remove scan motor through the RH
frame.
Replacement
NOTE: Replacement motors have both J104
and J115 marked on the connector. Scan
motor connector should be marked as J104.
1. If scan motor was replaced, delete J115
on the connector.
2. Reinstall in reverse order.
12/88
REP 3.12
4-22
Telecopier 7017 / 7017SF
www.printcopy.info
www.printcopy.info
