manualshive.com logo in svg

Xerox Telecopier 7017, Technical Reference Manual

Share
Download
Xerox Telecopier 7017 Technical Reference Manual Download Page 54

REP 3.10 Scan Output Drive
Roller

Parts List on PL 3.3

Removal

1. Remove power cord.

2. Remove document catch tray assembly

(REP 1.1).

3. Remove RH cover (REP 1.2).

4. Remove coupler cover (REP 1.3).

5. Remove LH cover (REP 1.4).

6. Remove video assembly (REP 3.7).

7. Remove  scan output drive roller.

a.

Remove scan output drive belt.

b.

Remove the three E-rings on the scan
output drive roller.

c.

Remove scan output drive roller and
brass bearing from RH frame.

d.

Remove scan output drive pulley
from scan output drive roller.

e.

Remove scan output drive roller and
plastic bearing from LH frame.

f.

Remove bearings from scan output
drive roller.

Replacement

Reinstall in reverse order.

REP 3.11 Scan Output Drive
Pulley

Parts List on PL 3.3

Removal

1. Remove power cord.

2. Remove document catch tray assembly

(REP 1.1).

3. Remove coupler cover (REP 1.3).

4. Remove LH cover (REP 1.4).

5. Remove speaker assembly (REP 5.2).

6. Remove scan output drive pulley.

a.

Remove scan output drive belt.

b.

Remove E-ring securing scan output
drive pulley.

c.

Remove scan output drive pulley.

Replacement

Reinstall in reverse order.

12/88

Telecopier 7017 / 7017SF

4-21

REP 3.10, 3.11

www.printcopy.info

www.printcopy.info

Summary of Contents for Telecopier 7017



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands