4
.2
<Network setup>
5
Enter a byte between 0 and 255 using the number keypad and
press the
Scroll
buttons to move between bytes.
Repeat this to complete the address from the 1st byte to the 4th
byte.
6
When you have finished, press
Enter
.
7
Repeat steps 5 and 6 to configure the other TCP/IP parameters:
subnet mask and gateway address.
8
Press the
Scroll
buttons until
Static
appears and press
Enter
.
9
Press the
Scroll
buttons until
Primary DNS
appears and press
Enter
.
10
Enter each byte of the address and press
Enter
.
11
Press the
Scroll
buttons until
Secondary DNS
appears and press
Enter
.
12
Enter each byte of the address and press
Enter
.
13
Press
Stop/Clear
to return to Standby mode.
Dynamic addressing (BOOTP/DHCP)
To have a TCP/IP address assigned automatically by the server, take the
following steps:
1
Press
Menu
until
Network
appears on the bottom line of the
display.
2
Press
Enter
when
TCP/IP
appears.
3
Press the
Scroll
buttons until
DHCP
or
BOOTP
appears and press
Enter
.
4
Press
Stop/Clear
to return to Standby mode.
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
Enter
.
2
Press the
Scroll
buttons until
Ethernet Speed
appears and press
Enter
.
3
Press the
Scroll
buttons until the speed you want appears and
press
Enter
.
4
Press
Stop/Clear
to return to Standby mode.
Restoring the network configuration
You can return the network configuration to its default settings.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
Enter
.
2
Press the
Scroll
buttons until
Clear Setting
appears and press
Enter
.
3
Press
Enter
when
Yes
appears to restore the network
configuration.
4
Power the machine off and back on.
Printing a network configuration page
The Network Configuration page shows how the network interface card
in your machine is configured.
1
Press
Menu
until
Network
appears on the bottom line of the
display and press
Enter
.
2
Press the
Scroll
buttons until
Network Info
appears and press
Enter
.
3
Press
Enter
when
Yes
appears.
The Network Configuration page prints out.
Summary of Contents for Printer fwww
Page 1: ...User Guide...
Page 95: ...Software section...
Page 133: ...www xerox com office support...