4-64
Xerox Internal Use Only
Phaser 6500/WorkCentre 6505 Service Manual
General Troubleshooting
FB Motor Test
Note
The FB Motor automatically stops at the limit of travel in both directions.
1. Enter Service Diagnostics (page 4-8).
2. Open the Platen Cover.
3. Perform the
Fax/Scanner Diag
>
Scanner Maintenance > IIT I/O Check
>
FB
Motor
test.
4. Press the Arrow buttons to select
Forward
.
5. Press
OK
to run the test.
6. Check that the carriage moves to the Right.
7. Press
Stop
to return one step higher menu.
8. Repeat the Lamp test
Fax/Scanner Diag
>
Scanner Maintenance > IIT I/O
Check
>
FB Motor
test.
9. Press the Arrow buttons to select
Reverse
.
10. Check that the carriage move to the Left.
11. Press
Stop
to stop the test.
s6500-103
