Phaser 6500/WorkCentre 6505 Service Manual
Xerox Internal Use Only
2-31
Theory of Operation
Transfer Belt and Fuser
Transfer Belt
The Transfer Belt consists of the Transfer Belt and ADC Sensor.
•
Belt — The belt feeds media toward the Fuser.
•
ADC Sensor — The ADC Sensor detects test toner patches on the belt and
converts them to voltage value. The voltage value is used to control toner
density.
Fuser
The Fuser fixes transferred toner onto the paper using heat and pressure and feeds
the paper before and after toner is fixed. The Fuser consists of these components:
heat roller, heater lamp, thermostat, temperature sensors, pressure belt, exit roller,
and exit sensor.
•
Exit Sensor — The exit sensor detects printed pages after fusing.
s6500-048
Exit Roller
Transfer Belt
ADC Sensor
Blade
Assembly
Fuser
Heat Roller
Heater Lamp
Thermostat
Temperature Sensor
Temperature Sensor
Pressure Belt
Rear View
Exit Sensor
Front
