8-160
Xerox Internal Use Only
Phaser 6500/WorkCentre 6505 Service Manual
Service Parts Disassembly
MFP MCU Board
MFP PL 8.3.6 (PWBA MCU)
1. Use the Service Diagnostics routine “Save NVM to ESS” on page 4-15 to
transfer the contents of the MCU NVRAM to the IP Board.
2. Exit Service Diagnostics and turn Off the printer.
3. Disconnect the Power Cord from the wall outlet.
4. Open the Front Cover.
5. Remove the Left Side Cover (page 8-37).
6. Remove the Outer Pole Cover (page 8-39).
7. Remove the MFP Right Side Cover (page 8-40).
8. Remove the Rear Cover (page 8-43).
9. Remove the Top Cover (page 8-45).
10. Remove the LVPS Card Cage (page 8-64).
11. Unplug all connectors from the MCU Board.
12. Remove the 6 screws (silver, with flange, 6mm) that secure the MCU Board to
the chassis and remove the board.
s6500-344
P/J11
P/J10
P/J41
P/J40
P/J28
P/J23
P/J26
P/J24
P/J21
P/J22
P/J42
P/J15
P/J14
P/J17
P/J31
P/J18
P/J19
P/J16
P/J20
P/J29
P/J27
