4-40
Xerox Internal Use Only
Phaser 6500/WorkCentre 6505 Service Manual
General Troubleshooting
Duplex Clutch
The Duplex clutch engages drive to the rollers. To test the clutch:
Note
Close the Interlock Switch to provide power to the device under test.
1. Enter Service Diagnostics (page 4-8).
2. Run the Duplex Clutch test:
Engine Diag
>
Motor Test
>
Duplex Clutch
.
A click is heard when the clutch is energized.To test the clutch and the duplex exit
motor:
1. Enter Service Diagnostics (page 4-8).
2. Open the Front Cover.
3. Run the Exit Motor Full2 test:
Engine Diag
>
Motor Test
>
Exit Motor Full2
.
4. While the motor is running, press the
Up
arrow to find
Duplex Clutch
. Press
OK
to run the test.
5. Check that the gear is rotating
.
6. Press
Cancel
to stop the test.
7. Press the
Down
arrow to find Exit Motor Full2
and
Cancel
the test.
s6500-127
