Image Quality
Xerox Internal Use Only
Phaser 3330 and WorkCentre 3335/3345
Service Manual
3-15
Ghosting or Residual Image
There are faint, ghostly images appearing on the page. The images may be either from a previous
page or from the page currently being printed.
Initial Actions
•
Ensure there is no debris on the path.
Troubleshooting Reference Table
Troubleshooting Procedure Table
Applicable Parts
Example Print
• Toner Cartridge, Refer to
) or Main PWB (PL 6.1.7,
• Transfer Roller (PL 3.1A.40,
Step
Actions and Questions
Yes
No
1.
Remove the Toner Cartridge and clean the
high voltage supply terminals.
Remove and reseat connections on the HVPS
board.
Does the error persist?
Go to step 2.
Complete.
2.
Replace the Toner Cartridge. Refer to
.
Does the error persist?
Go to step 3.
Complete.
3.
Use supplies page to determine installed
date/Life remaining of Roller.
Is the Roller at end of life?
Replace the Transfer
Roller (PL 3.1A.40,
).
Go to step 4.
4.
• Replace the Main PWB (PL 1.0.7,
) or Main PWB (PL
6.1.7,
Residual Image/Ghosting
Summary of Contents for Phaser 3330
