Xerox N2125N - DocuPrint B/W Laser Printer, Service Manual

Page: 182 / 335

02/2000
4-83 DocuPrint N2125
REP 11.8, REP 11.9
Repair-Adjustment Initial Issue
Figure 2 Chute Spring
Figure 3 Extension Springs
Replacement
1. Reinstall the components in the reverse order.
REP 11.9 Feeder PWB
Parts List on PL 11.2
Removal
CAUTION
These components are susceptible to electrostatic discharge. Observe all ESD procedures to
avoid damage.
WARNING
Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 550 Sheet Feeder ( REP 11.1 ).
2. Remove the Tray from the Feeder.
3. Remove the 550 Sheet Feeder Right Cover ( REP 11.2 ).
4. Remove the 550 Sheet Feeder Left Cover ( REP 11.3 ).
5. Remove 550 Sheet Feeder Gear Bracket Assembly ( REP 11.4 ).
6. Remove the Top Plate ( REP 11.5 ).
7. Remove the 550 Sheet Feeder Drive Assembly ( REP 11.6 ).
8. Disconnect P/J64, P/J65, P/J66, and P/J67 on the Feeder PWB ( Figure 1 ).
9. Remove the four screws that secure the Feeder PWB and remove the PWB ( Figure 1 ).
Figure 1 Feeder PWB
manuals4you.com manuals4you.com